Products
Home / Products /

Clamp Current Meter

/

Large Caliber Clamp AC/DC Current Meter

/ETCR7100A Super Large Clamp Leakage Current Meter 4000A

ETCR7100A Super Large Clamp Leakage Current Meter 4000A

Measurement of AC leakage current,large current.


1. Model No.:ETCR7100A

2. Current Range : AC 0.0mA~4000A

3. Data Storage : 99units

4. Frequency : 50Hz ,60Hz automatic identification

5. Sampling Rate : 2 times/second

6. Power Supply : 6V DC(LR6×4 alkaline dry batteries)


Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
  • 7000 series large caliber leakage clamp meter
    ETCR7000 Large Caliber Leakage Clamp Meter

    Measurement of AC leakage current, current. 1. Model No.: ETCR7000 2. Range:  0.00mA~2000A 3. Data Storage: 200 groups 4. Line Voltage: below 600V 5. CT Size: 80mm x 80mm 6. Power Supply :6V DC(LR6×4 alkaline dry batteries)

  • 7000B Series Large Caliber Leakage Clamp Meter
    ETCR7000B Large Caliber Leakage Clamp Meter AC2500A

    Measurement of AC leakage current,current. 1. Model No. : ETCR7000B 2. Current Range : 0.0A~2500A 3. CT Size : 80mm×80mm 4. Data Storage : 99 groups 5. Working Current : Open backlight 50mA;  close backlight 25mA 6. Power Supply : 6V DC(LR6×4 alkaline dry batteries)

  • 7100 Series Super Large Clamp Leakage Current Meter
    ETCR7100 Super Large Clamp Leakage Current Meter AC3200A

    Measurement of AC leakage current,large current. 1. Model No.:ETCR7100 2. Current Range : AC 0.0mA~3200A 3. Data Storage : 99units 4. Frequency : 50Hz ,60Hz automatic identification 5. Sampling Rate : 2 times/second 6. Power Supply : 6V DC(LR6×4 alkaline dry batteries)

  • 9200 series H/L voltage clamp current meter
    ETCR9200B Wireless H/L Voltage Clamp Current Meter AC 0mA~1200A

    Measurement of High/Low voltage AC current below 60kV. (Above 600V, operate with insulation rod). 1. Model No.: ETCR9200B 2. Current Range: AC 0mA~1200A 3. Resolution: 1mA 4.CT Size: φ68mm 5. Line Voltage: Below 60kV current test , operate with insulation rods 6. Power Supply: 6VDC (LR03 × 8pcs alkaline dry batteries)

  • 1500B Series Satellite Timing Service Remote High Voltage Phase Detector
    ETCR1500B Satellite Timing Service Remote High Voltage Phase Detector

    Applied to electric power lines below 500KV, high voltage switchgear (metalclad withdraw switchgear, ring main unit, etc.) or substation remote phase detecting, phase test, phase sequence judgment and electricity inspection, etc. 1. Model : ETCR1500B 2. Phase Detection Voltage : AC10V~500kV 3. Satellite Phase Detecting Distance : 500km 4. Normal Phase Detecting Distance : 260m 5. Voice Prompt : "X signal is normal, Y signal is normal, same phase, out phase". 6. Power Supply : Host:3.7V, 2600mAh Rechargeable lithium battery;Detector:3.7V, 600mAh Rechargeable lithium battery

  • Non-contact high voltage electroscope detector
    ETCR1820 Non-Contact High Voltage Electroscope

    Non-Contact High Voltage Electroscope applied to on-site high voltage line electricity testing, identify voltage level of high voltage system, inspect fault of high voltage line, repair the inspect induced voltage of the neon lamp, high voltage sodium lamp, inspect residual high voltage or induced voltage, etc. 1. Model No.: ETCR1820 2. Electricity Test Range: 380V~500KV 3. Electricity Test Level: 9 gears 4. Electricity Test Indication:Audible and visual alarm 5. Protection Level: IP65 6. Power Supply: Zn-Mn dry battery 6F22, 9V

  • 6000 series AC/DC clamp leakage current meter
    ETCR6000 AC/DC Clamp Leakage Current Meter

    Measurement of AC/DC leakage current. 1. Model No.: ETCR6000 2. Range: 0mA~60.0A 3. Data Storage: 99 groups 4. Line Voltage: below 600V 5. CT Size: Φ7mm 6. Power Supply: Alkaline battery 6LR61  9V

  •  2800C  Series Non-Contact Earth Resistance On-line Detector
    ETCR 2800C Non-Contact Earth Resistance On-line Detector

    On-line monitoring of grounding resistance and metal loop coupling resistance, grounding condition monitoring 1. Model No.: ETCR2800C 2. Test Mode: Non-contact type 3. Communication Mode: RS485 or GPRS communication (optional) 4. Resistance Range: 0.01Ω~200Ω; 5. Accuracy: ±2%rdg±3dgt(20℃±5℃,Below70%RH) 6.Power Supply: 6VDC~12VDC, 50mA Max.

Top
Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
  • Home

    Products

    skype

    whatsapp