Products
Home / Products /

Clamp Current Meter

/

Flexible Coil Large Current Clamp Meter

/ETCR6900 Flexible Coil Large Current Clamp Meter

ETCR6900 Flexible Coil Large Current Clamp Meter

Measurement of AC current.


1. Model No.: ETCR6900

2. Range:AC  0.00A~9999A

3. Data Storage: 99 groups

4. Line Voltage: below 600V

5. Coil Diameter: Φ200mm

6. power supply : Zinc manganese dry battery  6F22 9V






Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
  • 7350 Series  Flexible Coil Clamp Power Meter
    ETCR7350 Rogowski Coil Flexible Coil Clamp Power Meter

    Measure three-phase AC voltage, current, active power, reactive power, apparent power, total power,thephase between current and voltage,thephase between phase voltage, frequency, electric energy, phase sequence, etc. 1. Modle No.: ETCR7350 2. Current Measurement Range:  AC 0.0A~6000A 3. Voltage Measurement Range:AC 0.01V~600V 4. Active Power Measurement Range:0.00W~3600kW 5. Apparent Power Measurement Range:0.00VA~3600kVA 6. Power Supply : 6V DC(LR03X4PCS)

  • 070A Series R Type Clamp Current Sensor
    ETCR070A R Type Clamp Current Sensor 1000A

    AC large current, high harmonic current, phase, electric energy, power, power factor and other industrial electricity consumption and electricity metering detection. Apply for industrial control device, oscilloscope, harmonic analyzer, path analyzer, double clamp earth resistance tester, cable fault tester, power quality analyzer. 1. Model No. : ETCR070A 2. Input Current Range : 0A~1000A 3. Output Signal : 1A~5A 4. Frequency : 40Hz~1kHz 5. Accuracy Class : 0.5 6. CT Size : Φ70mm

  • 1000d series non-contact phase sequence detector
    ETCR1000D Non-contact Phase Sequence Detector

    Phase sequence detection (positive phase, anti-phase, default phase), live line inspection, simple electrical inspection, fire line identification, default phase judgment, broken line location search, DC line breakpoint detection, line maintenance. 1. Model No.: ETCR1000D 2. Test Method: Non-contact type 3. Live Electricity Range: AC 70~1000V 4. Frequency Range: 45~65Hz 5. Clamp Wire Diameter: Φ10~Φ40mm 6. Power Supply: DC 3V AA alkaline batteries (LR6)×2PCS

  • 9620 series low voltage CT transformation ratio tester
    ETCR9620 Low Voltage CT Turn Ratio Tester

    Leakage current, current, transformation ratio, ratio difference, angle difference, phase difference and polarity test of current transformer primary & secondary circuits in 380V/220V power distribution system. 1. Model No.:ETCR9620 2. Primary Current Test Accuracy: 0.0A~3000A/ 0.1A/ ±1%FS 3. Secondary Current Test Accuracy : 0.00mA~5A/ 0.01mA/ ±0.5%FS 4. Turn Ratio Measurement Range: 1~500 5. Communication Cable Length: 2M 6. Power Supply : Alkaline batteries (1.5V AAA × 4)

  • High Voltage Insulation Resistance Tester 5KV
    ETCR3500 High Voltage Insulation Resistance Tester

    High Voltage Insulation Resistance Tester applied to insulation resistance testing of cable, motor, generator, transformer, mutual inductor, high voltage switch, arrester and other large equipment. Insulation resistance measurement (IR); polarization index measurement (PI); absorption ratio (DAR); ramp test mode(RAMP) ; filtered resistance test (FR); Voltage measurement(V); current measurement(nA) 1. Model No.: ETCR3500 2.. Rated Voltage: 250v~5Kv 3.. Insulation Resistance Range: 0.5MΩ~2TΩ 4. Voltage Range: AC/DC 0~1000V 5. Output Short Circuit Current: ≥5mA MAX 6.Power Supply: Rechargeable lithium battery pack 5200mAh

  • 3460B Series megger Insulation Resistance Tester
    ETCR3460B Insulation Resistance Tester

    Suitable for measuring the insulation resistance of electric motor, cable, switch, electrical appliance and other electrical equipment and insulation materials. 1. Model No.: ETCR3460B 2.Rated Voltage: 50V~ 5000V 3. Insulation Resistance Range: 0.1MΩ~400GΩ 4. Voltage Range: AC/DC 0~750V 5. Output Short Circuit Current: ≥2mA MAX 6. Power Supply: DC 1.5V LR14*6PCS

  •  lightning protection component SPD tester
    ETCR3800A Lightning Protection Component Tester

    Lightning Protection Component (SPD) TesterApplied to testing the performance parameters of the lightning protection elements such as metal oxide varistor(MOV) and gas discharge tube (GDT) and the insulation resistance (Mohm) , polarization index (PI), dielectric absorption ratio (DAR). 1. Model No.:ETCR3800A 2. Test Mode: DC power drop method 3. MOA Range: 50~3000V; 0~1000μA 4. GDT Range: 50~3000V 5. Insulation Resistance Range: 500~2500V; 0.5MΩ~10GΩ 6. Power Supply : DC 7.4V 2600mAH rechargeable lithium battery

  • 8340 series multichannel current & voltage on-line tester
    ETCR8340 Multichannel Current & Voltage On-line Tester

    Simultaneously monitor and record 1~3 channel of AC leakage currents, currents, and voltages. Used for the inspection of circuit insulation faults, monitoring of intermittent leakage faults, transformer core grounding current monitoring, cable grounding circulating current monitoring and other line current and voltage monitoring. 1. Model No.:ETCR8340 2. Current Range: AC 0.00mA~20A/60A/300A/600A/1000A/6000A(option) 3. Voltage Range: AC 0.0V~600V 4. Current Test  Channel : 1~6 channel(option) 5. CT Caliber: Φ40mm/Φ60mm/64x16mm/Φ100mm(optional) 6. Power Supply: 6VDC~24VDC,50mA Max.(External power supply)

Top
Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
  • Home

    Products

    skype

    whatsapp