ETCR6420 Clamp Multimeter

Measurement of DC current and voltage、AC current & voltage true RMS, resistance, surge, capacitance, frequency, on-off test, temperature, diode forward voltage drop and others parameters. 1. Model No. : ETCR6450 2. DC Voltage : 400mV/4V/40V/400V/1000V 3. AC Voltage : 400mV/4V/40V/400V/700V 4. AC Current : 4A/40A/400A/1000A 5. Resistance : 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ 6. Power Supply : 6F22  9VX1

Measurement ofAC/DC Current, AC/DC voltage, resistance, capacitance, continuity test, diode forward voltage drop andLED working voltage parameters etc. 1. Model No. : ETCR6470 2. DC Voltage : 2V/20V/200V/2000V 3. AC Voltage : 2V/20V/200V/2000V 4. DC Current : 20A/200A/2000A 5. Capacitance : 20uF/200uF/2uF/20uF/200uF/2000uF 6. Power Supply : 6F22 9V(IEC6F22, NEDA1604, JIS006P)

Double Clamp Digital Phase Voltammeter, direct measurement of AC voltage and AC current in the measured circuit which not open-loop, measure the phase between two voltages, two current and voltage current, and indirectly measure the power factor and power of the circuit. 1. Model No.: ETCR4000 2. Voltage Range：0~500V； 3. Current Range ：0~20A； 4. Phase Range ：0~360°； 5. CT Size：Φ8mm; 6. Power Supply : DC9V LR61.5V AAX6PCS

Measurement of AC leakage current, ACcurrent. 1. Model No.；ETCR6300 2. Range：AC  0.000mA～60.00A 3. Data Storage: 99 groups 4. Peak Hold 5. Line Voltage: below 600V 6. Power Supply: Alkaline battery 6LR61 9V

Phase sequence detection (positive phase, anti-phase, default phase), live line inspection, simple electrical inspection, fire line identification, default phase judgment, broken line location search, DC line breakpoint detection, line maintenance. 1. Model No.: ETCR1000D 2. Test Method: Non-contact type 3. Live Electricity Range: AC 70~1000V 4. Frequency Range: 45~65Hz 5. Clamp Wire Diameter: Φ10~Φ40mm 6. Power Supply: DC 3V AA alkaline batteries (LR6)×2PCS

Multifunction Wireless High Voltage Phase Detector applied to phase detecting, phase testing, phase sequence judgement and electrictity testing of the high voltage line,metalclad withdraw switchgear and ring main unit and others occasion. 1. Model No.: ETCR1560 2. Phase Detection Mode: Normal phase detector & Remote phase detection 3. High Voltage Phase Detection  Voltage : AC 10V~500kV 4. Ring Main Unit Phase Detection Voltage: AC 1V~600V 5.  Metalclad Withdraw Switchgear  Phase Detection  Voltage : AC10KV ~35KV 6.   Power Supply: Host: 3.7V, 2600mAh Rechargeable lithium battery; Detector: 3.7V, 600mAh Rechargeable lithium battery

Applied to on-site high voltage line electricity testing, identify voltage level of high voltage system, inspect fault of high voltage line, repair the inspect induced voltage of the neon lamp, high voltage sodium lamp, inspect residual high voltage or induced voltage, etc. 1. Model : ETCR1820B 2. Voltage Gear : Nine gears 3. Electricity TestRange : 240V～500KV(optinal) 4. Electricity Test Level : 380V、6.6kV、10kV、35kV、66kV、110kV、220kV 5. Voltage to Earth Display Range : 0.1kV～150kV（Voltage to earth） 6. Power Supply : Zn-Mn dry battery 6F22, 9V

Precision4-wire, 3-wire, simple 2-wire measurementmethod to measure earth resistance, soil resistivity, earth voltage. 1. Model No. : ETCR3000B 2. 2/3/4-wire method measure earth resistance,Range：0.00Ω～30.00kΩ； 3. Soil resistivity measurement, Range：0.00Ωm～9000kΩm； 4. Earth voltage measurement,Range：AC 0～600V 5. Data storage: 300 sets 6. Power Supply : DC 9V (Alkaline dry battery LR14 1.5V 6 PCS )