Products
Home / Products /

Electric Power Tester

/

PT Voltage-drop/Load Tester

/ETCR4500 Wireless PT Secondary Voltage-Drop/Load Tester

ETCR4500 Wireless PT Secondary Voltage-Drop/Load Tester

Wireless PT Secondary Voltage Drop/Load Tester used for wireless synchronous measurement of secondary voltage drop, load, current, voltage, phase and other parameters of the potencial transformer in substation.

1. Model No.: ETCR4500

2. Test Parameter: Voltage,current,phase,frequency,harmornic,power etc.

3. Communication Mode: GPS Satellite Timing Service & LORA wireless communication

4. Communication Distance: 1000m

5. LCD: 5inch touch color screen

6. Power Supply: DC7.4V, 5200mAH rechargeable lithium battery



Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
  • High Voltage Approach Electric Alarm
    ETCR1880 Helmet Type High Voltage Approach Electric Alarm

    Helmet Type High Voltage Approach Electric Alarm, after the operator wears the alarm, and close to the high voltage charged body for a certain distance, the alarm will send out a sound and light alarm according to the  safety distance of the corresponding voltage level to remind the electrical worker to pay attention to safety and avoid high voltage electric shock accident. This product can also be used for line fault detection and electroscope. 1. Model No.: ETCR1880 2. Alarm Voltage Range : 1kV~500kV 3. Electricity Testing Mode : Non-contact mode 4. Detection Mode : Automatic trigger 5. Max. Alarm Distance: 5.5m 6. Power Supply: CR1632(140mAH)button cell

  • 8600 series leakage protector(RCD) tester
    ETCR8600 Leakage Protector(RCD) Tester 15~500mA

    Testing leakage operating time of various leakage protector. 1. Model No.: ETCR8600 2. Leakage Current Range : 15mA~500mA (10 gears) 3.Leakage Operating Time: 0ms~999ms 4. Line Voltage Measurement: Below 250V 5. Test Mode: Manual or Automatic 6. Power Supply: DC 6V LR03 1.5VX4PCS

  • 8300 series three channel current monitoring recorder
    ETCR8300/ETCR8300A Three Channel Current Monitoring Recorder

    At the same time online monitoring and recording 1 ~ 3 channelAC leakage current and current, used for circuit insulation fault troubleshooting, monitoring intermittent leakage fault, check the happen time of insulation fault and maintenance lines, etc. 1. Model No.: ETCR8300/ETCR8300A 2. CT Size: 25mmX30mm/ 35mmX40mm 3. Current Range : 0.00mA ~20A/0mA~500A 4. Resolution:  AC 0.01mA/ AC 1mA 5. Current Clamps Quantity: 1 - 3PCS (optional); 6. Power Supply : Rechargeable lithium battery DC3.7V,2600mAh

  • 3520B Series High Performance HV Insulation Resistance Tester
    ETCR3520B High Performance HV Insulation Resistance Tester

    Suitable for the insulation resistance test of large-scale electrical equipment and transmission cable in large-capacity, high-voltage, and strong-inductive electrical environments. Insulation resistancetest (IR); polarization indextest (PI);Dielectric absorption ratio test (DAR);Step test(STEP); Ramp test (RAMP);Dielectric discharge index test(DD). AC/DCVoltage test(V);Distributed capacitance test(CAP). 1. Model No.: ETCR3520B 2. Insulation Resistance Range: 0.005MΩ~20.0TΩ 3. Rated Voltage: 50v~10Kv(7gears) 4. Shout Circuit Current: ≥7mA MAX 5. Custom Setting Voltage:  40V~1000V 6. Power Supply: Rechargeable lithium battery pack 6.2Ah 14.8V

  • ETCR1900
    ETCR1900 High Voltage Operation Anti-touch Smart Early Warning Device

    High Voltage Operation Anti-touch Smart Early Warning Device provide an intelligent high voltage close to electrical alarm device for electric working vehicles. When the working vehicle closing to the high-voltage transmission line for a certain distance, the device will send out an alarm signal to remind the operators that the equipment is closing to the high-voltage power, should pay attention to the danger, avoid the crane arm of the working vehicle touch the high-voltage transmission line, and protect the safety of the workers and power facilities. 1. Model : ETCR1900 2. Power Supply : Sensor: DC 7.4V, 2600mAh; Receiver: DC7.4V,2600mAh 3. Electricity Testing Range : 1kV~500kV 4. Wireless Transmission Mode : 230Mhz 5. Wireless Transmission Distance : 200m(In the open environment)

  • 090KU Series Microampere Level High-precision Leakage Current Sensor
    ETCR090KU Microampere Level High-precision Leakage Current Sensor

    Detection of AC leakage current, higher harmonic current, phase, power factor etc. Lightning arrester and insulator on-line detecting 1. Model No.: ETCR090KU 2. Range: 0.000mA~10A AC 3. Turn Ratio:1000:1 4. Resolution: 1uA AC 5. Accuracy Class: 0.5 6. CT Size:Φ90mm

  • 033H Series  High Voltage Clamp Leakage Current sensor
    ETCR033H High Voltage Clamp Leakage Current/Current Sensor 20A

    Detecting of H/L voltage AC leakage current/current, higher harmonic current, phase, electric energy, power, power factor etc. 1. Model No. : ETCR033H 2. Range : 0.000mA~20A AC 3. Resolution: 0.001mA 4. Accuracy Class: 1.0 5. Turn Ratio : 800:1 6. CT Size : Φ33mm

  • ETCR6680 Earth leakage Tester
    ETCR6680 Clamp Leakage Current Meter

    AC leakage current measurement, earth leakage current measurement, current measurement, harmonic test, etc. 1. Model : ETCR6680 2. AC leakage Current Range : 0.00mA~2000A 3. CT Size : 80mm×80mm 4. Data Storage : 2000 groups 5. Power Supply:Rechargeable lithium battery DC3.7V/1000mAh

Top
Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
  • Home

    Products

    skype

    whatsapp