ETCR4300 Three-phase Digital Phase Voltammeter Manufacturer & Supplier

Overview
Specification
Relate Model
Download

Overview

ETCR4300 Three-phase Digital Phase Voltammeter is a multifunctional, digital and intelligent instrument specially developed by our company for field testing. It has the characteristics of high accuracy, high stability, low power consumption and convenient to use etc. Under the condition of the tested circuit does not open-loop, it can measurement of three-phase AC voltage, current, phase between voltages, phase between current, phase between current and voltage, frequency, phase sequence, active power, reactive power, apparent power, power factor, current vector sum, judge transformer wiring group, sensibility and capacitive circuit, test the secondary circuit and differential bus protection system, read the phase relationship between differential protection between each groups CT, check watt hour meter wiring correctly or not, maintenance line equipment, etc., to provide a safe, accurate and convenient new power meter for electricity inspectors.

ETCR4300 Three-phase Digital Phase Voltammeter with shake proof, skid proof, and high insulation sheath. Adopts 2.8 inch color LCD screen, dynamic display, vector diagram indication, clear and obvious, which shows the exquisite and luxurious appearance. Its sharp and small shape current clamp is suitable for the place where the wires arranging are dense.

ETCR4300 Three-phase Digital Phase Voltammeter also name intelligent three phase digital phase voltammeter, multifunction three phase digital phase voltmeter and three clamp digital phase voltmeter etc. Suitable for electric power, petrochemical, metallurgy, railway, industrial and mining enterprises, scientific research institutions, measurement departments. It is especially suitable for electric energy billing system and relay protection system.

Specification

Working Conditions

Influence Quantity	Base Condition	Working Conditions	Remark
Environment Temperature	23℃±1℃	-10℃~40℃
Environment Humidity	40%～60%	＜80%
Signal Waveform	Sine wave	Sine wave	β=0.01
Signal Frequency	50HZ±1HZ	45HZ～65HZ
Meter Working Voltage	9V±0.1V	9V±1V
Current Amplitude Of Phase Frequency & Sequence Detect	200mA±3mA	2mA～20A	----
VoltageAmplitude Of Phase Frequency & Sequence Detect	100V±10V	10V～600V	----
Current Amplitude Of Power Factor detect	200mA±3mA	20mA～20A	----
VoltageAmplitude Of Power Factor detect	100V±10V	10V～600V	----
External Electric & Magnetic Field	To be avoided
The Tested Wire Position	Measured wire at approximately the geometric center of the clamp

Technical Parameters

Function	Description
CT Size	Φ8mm
Power Supply	DC9V alkaline batteries（1.5V AA×6）
Working Current	Max power consumption of open backlight: 135mA, battery power can continues working 6 hours
Working Current	Meter power consumption of close backlight:90mA,battery power can continues working 9 hours
Display Mode	2.8 inch TFT color LCD screen, display area 58mmX44mm
Meter Size	196mm×92mm×54mm
Voltage Range	AC 0.00V～600V
Current Range	AC 0.0mA～20.0A
Phase Range	0.0°～360.0°
Frequency Range	45.00Hz～65.00Hz
Active Power Range	0.0W～12kW
Reactive Power Range	0.0var～12kvar
Apparent Power Range	0.0VA～12kVA
Power Factor Range	-1～+1
Current Vector Sum	0mA～60.0A
Resolution	Voltage:AC 0.01V
	Current:AC 0.1mA
	Phase:0.1°
	Frequency:0.01Hz
	Active power:0.1W
	Reactive power:0.1var
	Apparent power:0.1VA
	Power factor:0.001
	Current vector Sum:1mA
Phase Sequence	Positive phase: U1, U2, U3 or I1, I2, I3 cursors flash from left to right Invert phase: U1, U2, U3 or I1, I2, I3 cursor flash from right to left
Sampling Rate	About2 times/second
Data Hold	PressHOLD key to keep data, "DH" symbol display
Data Storage	500 groups
Communication Interface	USB interface, store data can be upload to computer, convenient to analyze management data
Auto Shutdown	15 minutes after boot up, the meter shuts down automatically without any operation
Backlight Function	Yes, Suitable for dark place and at night use
Voltage Detection	When the battery voltage is lower than 7.2V, low battery symbol appears, reminding replace battery
Weight	Host: 550g
	Current Clamp: 170g*3
	Test wires: 250g
Test Wire Length	1.5m
Current Clamp Length	2m
Working Temperature & Humidity	-10℃～40℃；below 80%Rh
Storage Temperature & Humidity	-10℃～60℃；below 70%Rh
Input Impedance	Test voltage input impedance: 1MΩ
Withstand Voltage	It took 1 minute to withstand 1000V/50Hz sine wave AC voltage between the meter line and the out shell
Insulation	≥10MΩ between meter lines and sheath shell
Structure	Double insulation, with insulation vibration-proof sheath
Suitable Safety Standard	IEC61010-1 CATⅢ 600V，IEC61010-031，IEC61326，Pollution 2

Error & Performance Index

Category	Measurement Range	Resolution	Intrinsic Error
Voltage	AC 0.00V～600V	0.01V	±(0.5%range)
Current	AC 0.0mA～20.0A	0.1mA	±(0.5%range)
Phase	0.0°～360°	0.1°	±1°
Active Power Range	0.0W～12kW	0.1W	±(1.0%range)
Reactive Power Range	0.0var～12kvar	0.1var	±(1.0%range)
Apparent Power Range	0.0VA～12kVA	0.1VA	±(1.0%range)
Frequency	45Hz～65Hz	0.01Hz	±(1.0%range)
Power Factor Range	-1～+1	0.001	±0.03

Relate Model

Model	CT Size	Voltage	Current	Phase	Frequency	Active Power	Reactive Power	Apparent Power	Power Factor
ETCR4000	Φ8mm	AC 0~500V	AC 0mA~20A	0～360°	/	/	/	/	/
ETCR4000A	Φ8mm	AC 0.00V~600V	AC 0.0mA~20.0A	0～360°	45.00Hz~65.00Hz	0.0W~12KW	0.0var～12kvar	0.0VA~12kVA	-1.000~+1.000
ETCR4020	35x40mm	AC 0.00V~600V	AC 0mA~600A	0～360°	45.00Hz~65.00Hz	0.0W~360KW	0.0var～360kvar	0.0VA~360kVA	-1.000~+1.000
ETCR4300	Φ8mm	AC 0.00V~600V	AC 0.0mA~20.0A	0～360°	45.00Hz~65.00Hz	0.0W~12KW	0.0var～12kvar	0.0VA~12kVA	-1.000~+1.000
ETCR4320	35x40mm	AC 0.00V~600V	AC 0mA~600A	0～360°	45.00Hz~65.00Hz	0.0W~360KW	0.0var～360kvar	0.0VA~360kVA	-1.000~+1.000