Products
Home / Products /

LPD/SPD Tester

/

Lightning Protection Component Tester

/ETCR3800A Lightning Protection Component Tester

ETCR3800A Lightning Protection Component Tester

Lightning Protection Component (SPD) TesterApplied to testing the performance parameters of the lightning protection elements such as metal oxide varistor(MOV) and gas discharge tube (GDT) and the insulation resistance (Mohm) , polarization index (PI), dielectric absorption ratio (DAR).


1. Model No.:ETCR3800A

2. Test Mode: DC power drop method

3. MOA Range: 50~3000V; 0~1000μA

4. GDT Range: 50~3000V

5. Insulation Resistance Range: 500~2500V; 0.5MΩ~10GΩ

6. Power Supply : DC 7.4V 2600mAH rechargeable lithium battery


Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
  • 3800B Series Lightning Protection Component Tester
    ETCR3800B Lightning Protection Component Tester

    Applied to testing the performance parameters of the lightning protection elements such as metal oxide varistor(MOV) and  gas discharge tube (GDT) and the insulation resistance (Mohm), polarization index (PI), dielectric absorption ratio (DAR). 1.Model No.:ETCR3800B 2. Initial action voltage test,Range:50~3000V 3. Leakage Current ,Range:0~1000μA 4 .DC breakdown voltage test,Range:50~3000V 5 .Insulation resistance Mohm test:Range:0.5~10GΩ 6. Power Supply : DC 7.4V 2600mAH rechargeable lithium battery

  • 9100 series H/L voltage clamp current meter
    ETCR9100S Portable H/L Voltage Clamp Current Meter AC 0.00mA~600A

    Measurement of High/Low voltage AC leakage current and current. (Above 600V, operate with insulation rod). 1. Model No.: ETCR9100S 2. Current Range: AC 0.00mA~600A 3. Resolution: 0.01mA 4.CT Size: φ33mm 5. Line Voltage: Below 60kV current test , operate with insulation rods 6. Power Supply: 6VDC (LR03 × 4pcs alkaline dry batteries)

  • Non-contact high voltage electroscope detector
    ETCR1820 Non-Contact High Voltage Electroscope

    Non-Contact High Voltage Electroscope applied to on-site high voltage line electricity testing, identify voltage level of high voltage system, inspect fault of high voltage line, repair the inspect induced voltage of the neon lamp, high voltage sodium lamp, inspect residual high voltage or induced voltage, etc. 1. Model No.: ETCR1820 2. Electricity Test Range: 380V~500KV 3. Electricity Test Level: 9 gears 4. Electricity Test Indication:Audible and visual alarm 5. Protection Level: IP65 6. Power Supply: Zn-Mn dry battery 6F22, 9V

  • DC Current Resistance Tester Series
    ETCR3660/3660B DC Current Resistance Tester(Microhmmeter 10A/20A)

    Applied to measuring transformer winding resistance; grounding continuity resistance; cable & conductor resistance; contact resistance of switches, connectors and relays; metal riveting resistance; winding resistance of coil, motor and transducer; connection resistance between metal components; welding point resistance; Battery parallel connection resistance; wire length measurement and calculation, etc. 1. Model No. :ETCR3660 2. Range : 10.0uΩ~50.00KΩ 3. Test Current :10A,1A, 100mA, 10mA, 2mA, 1mA, Automatic 4. Max Test Current : 10A 5. Measurement Method : Precision 4-wire method, 2 chennal A/D detecting simultaneously 6. Power Supply : DC 7.4V 5200mAh, rechargeable lithium battery, full charge about 8.4V

  • 3460B Series megger Insulation Resistance Tester
    ETCR3460B Insulation Resistance Tester

    Suitable for measuring the insulation resistance of electric motor, cable, switch, electrical appliance and other electrical equipment and insulation materials. 1. Model No.: ETCR3460B 2.Rated Voltage: 50V~ 5000V 3. Insulation Resistance Range: 0.1MΩ~400GΩ 4. Voltage Range: AC/DC 0~750V 5. Output Short Circuit Current: ≥2mA MAX 6. Power Supply: DC 1.5V LR14*6PCS

  • 045KU Series Microampere Level High-precision Leakage Current Sensor
    ETCR045KU Microampere Level High-precision Leakage Current Sensor

    Detection of AC leakage current, higher harmonic current, phase, power factor etc. Lightning arrester and insulator on-line detecting 1. Model No.: ETCR045KU 2. Range: 0.000mA~10A AC 3. Turn Ratio:1000:1 4. Resolution: 1uA AC 5. Accuracy Class: 0.5 6. CT Size:Φ45mm

  • 040HA Series  High Voltage Clamp Leakage Current sensor
    ETCR040HA High Voltage Clamp Leakage Current/Current Sensor 800A

    Detecting of H/L voltage AC leakage current/current, higher harmonic current, phase, electric energy, power, power factor etc. 1. Model No. : ETCR040HA 2. Range : 0mA~800A AC 3. Resolution: 1mA 4. Accuracy Class: 1.0 5. Turn Ratio : 4000:1 6. CT Size : Φ36mm

  • wireless phase detector
    ETCR1520 Ring Main Unit Wireless Phase Detector

    Ring Main Unit Wireless Phase Detector apply for ring main unit phase detecting of power distribution system,and phase, frequency, phase sequence test. 1. Model No.: ETCR1520 2. Phase detecting voltage : AC 1V~600V 3. Phase detecting distance : 30m 4. Phase detecting distance: 0°~360° 5. Frequency Range : 45.0Hz~65.0Hz 6. Power Supply: Host: 3.7V, 2600mAh Rechargeable lithium battery; Detector: 3.7V, 600mAh Rechargeable lithium battery

Top
Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
  • Home

    Products

    skype

    whatsapp