Products
Home / Products /

Earth Resistance Tester

/

Earth Resistance Tester-Round Clamp

/ETCR2100+ Clamp Earth Resistance Tester

ETCR2100+ Clamp Earth Resistance Tester

Clamp Earth Resistance Tester applied to earth resistance measurement, loop resistance measurement. no need to disconnect the grounding down leads, no need auxiliary electrode, saving time and more effect.


1. Model No.: ETCR2100+

2. Measure Range: 0.010Ω~1200Ω

3. Data Storage: 99 sets

4. Alarm Threshold Setting: 1-199Ω

5. Alarm Function: audible and visible alarm

6. Power Supply: 6VDC ( 4 PCS of No.5 Alkaline dry batteries)





Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
  • 2100A+ Series Clamp Earth Resistance Tester
    ETCR 2100A+ Clamp Earth Resistance Tester

    Earth resistance measurement, loop resistance measurement. 1. Model No.:ETCR2100A+ 2. Resistance Measure Range: 0.010Ω~200Ω 3. Data Storage: 99 sets 4. Alarm Threshold Setting: 1-199Ω 5. Alarm Function: audible and visible alarm 6. Power Supply : 6VCD ( 4 PCS of No.5 LR6 Alkaline dry batteries)

  • 2100C+ Series Clamp Earth Resistance Tester
    ETCR 2100C+ Clamp Earth Resistance Tester

    Earth resistance measurement, loop resistance measurement, grounding down leads leakage currentmeasurement, judge groundfault. 1. Model No.: ETCR2100C+ 2. Resistance Measure Range: 0.010Ω~1200Ω 3. Leakage Current Measure Range: 0.00mA~20.0A 4. Alarm Threshold Setting:1-199Ω 5. Alarm Function: audible and visible alarm 6. Power Supply : 6VDC ( 4 PCS of No.5 LR6 Alkaline dry batteries)

  • 001F Rogowski flexible coil current sensor
    ETCRFA-FB Rogowski Flexible Coil Current Sensor

    Measurement of AC large current, higher harmonic current, complex waveforms current, transient current, phase, electric energy, power, power factor etc. 1. Model No.:ETCRFA-FB 2. Current Range: AC 0A~3000A/6000/10000A(Optional) 3. Phase Error: ≤1° 4. Current Frequency: 45Hz~70Hz 5. CT Structure: Rogowski coil 6. Response Frequency: 0.1Hz~1MHz

  • 1000c series non-contact phase sequence detector
    ETCR1000C Non-contact Phase Sequence Detector

    Phase sequence detection (positive phase, anti-phase, default phase), live line inspection, simple electrical inspection, fire line identification, default phase judgment, broken line location search,DC line breakpoint detection, line maintenance 1. Model : ETCR1000C 2. Available Clamp Wire Size : ø1.6mm-ø16mm 3. Live Power Range : AC70-1000V, 45-65Hz (Sine Wave Continuous Input) 4. AutoShutdown : 5 minutes after booting up, the meter automatically shutdown 5. Insulation Strength : 5.4kV/rms 6. Power Supply : DC 3V AA alkaline batteries (LR6)×2PCS

  • 9310B series wireless H/L voltage U-type current meter
    ETCR9310B Wireless H/L Voltage U-Type Current Meter

    On-line AC current measurement below 500kV (above 600V operate with insulated rod). 1. Model No.: ETCR9310B 2. Measurement Range :0.00A~9999A(50/60Hz automatic) 3. DataStorage:99 groups 4. Test Mode : Non-contact U-type CT 5. CT Size : Ф68mm 6. Power Supply: 6V DC(LR03×8 alkaline dry batteries)

  • 068 Series Clamp Leakage Current Sensor
    ETCR068 Clamp Leakage Current Sensor 60A

    Measurement of AC leakage current, phase, power energy, power, power factor, harmonicetc. Apply to oscilloscope, harmonic analyzer, power fault analyzer and other industrial control devices. 1:Range:0.00mA~60A AC 2:Turn Ratio:800:1 3:Resolution : 0.01mA 4:Accuracy Class : 0.5 5:  Safety Class :   CATⅢ600V 6:  CT Size:Φ68mm

  • Double clamp digital phase voltage ampere Voltammeter
    ETCR4000 Double Clamp Digital Phase Voltammeter

    Double Clamp Digital Phase Voltammeter, direct measurement of AC voltage and AC current in the measured circuit which not open-loop, measure the phase between two voltages, two current and voltage current, and indirectly measure the power factor and power of the circuit. 1. Model No.: ETCR4000 2. Voltage Range:0~500V; 3. Current Range :0~20A; 4. Phase Range :0~360°; 5. CT Size:Φ8mm; 6. Power Supply : DC9V LR61.5V AAX6PCS

  • 6800 Series High Accuracy Clamp Leakage Current Meter
    ETCR6800 High Accuracy Clamp Leakage Current Meter

    on-line leakage current meter 1. Model No.: ETCR6800 2. Range : 0.00mA~1200A 3. Peak Hold : Peak value capture and hold function, long press HOLD key display peak value 4. Working Current : 5mA 5. Data Storage : 99 groups 6. Power Supply : Alkaline battery 6LR61 9V

Top
Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
  • Home

    Products

    skype

    whatsapp