ETCR1900 High Voltage Operation Anti-touch Smart Early Warning Device

When approaching the electrified object, the alarm will be triggered at a safe distance to remind the operators to pay attention on safety, avoid electric shock accidents, which provide safer guarantee for the workers working near the electricity. 1. Model : ETCR1840 2. Power Supply : Rechargeable lithium batteryDC 7.4V 600mAh 3. Alarm Voltage Rnage:Low voltage : 40V~1kV; Hight voltage:1kV~500kV 4. Alarm Mode : Vibration, light, buzzer 5. Protection Level : IP67 6. Electricity Testing Mode : Non-contact type

The alarm is installed on the grounding lead clip or insulated rod, when the cable or device is live, the alarm triggers the alarm function to send out audible and visual alarm to remind the operator to pay attention to safety and avoid electic shock accidents, providing safer protection for the operator. 1. Model : ETCR1850 2. Power Supply : Rechargeable lithium battery DC 7.4V 600mAh 3. Alarm Voltage Rnage : 40V~10kV 4. Working Frequency : 50Hz/60Hz 5. Electricity Testing Mode : Non-contact type 6. Detection Mode : Trigger automatic

Suitable for measuring the insulation resistance of electric motor, cable, switch, electrical appliance and other electrical equipment and insulation materials. 1. Model No.: ETCR3460B 2.Rated Voltage: 50V~ 5000V 3. Insulation Resistance Range: 0.1MΩ~1000GΩ 4. Voltage Range: AC/DC 0~750V 5. Output Short Circuit Current: ≥2mA MAX 6. Power Supply: DC 1.5V LR14*6PCS

Wireless High Voltage Electroscope applied to 380v ~ 220kV high voltage line electricity test, high voltage line voltage to ground test, induction voltage test, high voltage line current test. 1. Model No.: ETCR1800A 2. Electricity Testing Level: 380V~220kV 3. Voltage Level Display: 380V, 6.6KV, 10KV, 35KV, 66KV, 110KV, 220KV 4. Voltage to Earth Display Range : 0.1kV~150kV 5. Probe Length: 110mm (can be replaced with hooks or probes according to site conditions) 6. Power Supply:Host: DC 6V alkaline battery LR3X4PCS Detector: Zn-Mn dry battery 6F22, 9V

At the same time online monitoring and recording 1 ~ 3 channelAC leakage current and current, used for circuit insulation fault troubleshooting, monitoring intermittent leakage fault, check the happen time of insulation fault and maintenance lines, etc. 1. Model No.: ETCR8300/ETCR8300A 2. CT Size: 25mmX30mm/ 35mmX40mm 3. Current Range : 0.00mA ～20A/0mA～500A 4. Resolution:  AC 0.01mA/ AC 1mA 5. Current Clamps Quantity: 1 - 3PCS (optional）; 6. Power Supply : Rechargeable lithium battery DC3.7V，2600mAh

Measurement of High/Low voltage AC leakage current and current. (Above 600V, operate with insulation rod). 1. Model No.: ETCR9000S 2. Current Range: AC 0mA～1200A 3. Resolution: 1mA 4.Data Storage: 99 Groups 5. Line Voltage: Below 10kV current test , operate with insulation rods 6. Power Supply: 6VDC (LR03 × 4pcs alkaline dry batteries)

After the operator wears the alarm, and close to the high voltage charged body for a certain distance, the alarm will send out a sound and light alarm according to the  safety distance of the corresponding voltage level to remind the electrical worker to pay attention to safety and avoid high voltage electric shock accident. This product can also be used for line fault detection and electroscope. 1. Model : ETCR1880C 2. Alarm Voltage Range :  40V～1KV(Low voltage alarm) 3. Working Frequency : 50Hz/60Hz 4. Electricity Testing Mode : Non-contact mode 5. Detection Mode : Automatic trigger 6. Power Supply : CR1632（140mAH）button cell2PCS

Measurement of AC leakage current, higher harmonic current, phase, power energy, power factor. 1. Model No.:ETCR025K 2. Range：0.00mA~30A AC 3. Turn Ratio：800：1 4. Resolution:  0.01mA AC 5. Accuracy Class: 0.5 6. CT Size: Φ25mm