ETCR1880 Helmet Type High Voltage Approach Electric Alarm

After the operator wears the alarm, and close to the high voltage charged body for a certain distance, the alarm will send out a sound and light alarm according to the  safety distance of the corresponding voltage level to remind the electrical worker to pay attention to safety and avoid high voltage electric shock accident. This product can also be used for line fault detection and electroscope. 1. Model : ETCR1880C 2. Alarm Voltage Range :  40V～1KV(Low voltage alarm) 3. Working Frequency : 50Hz/60Hz 4. Electricity Testing Mode : Non-contact mode 5. Detection Mode : Automatic trigger 6. Power Supply : CR1632（140mAH）button cell2PCS

Online test the leakage current, current, transformation ratio, ratio error, angle error, phase and polarity of the primary and secondary circuit of the current transformer in the 380V/220V distribution system 1. Model No.:ETCR9600 2. Primary Current Test Accuracy: 0.0A～800A/ 0.1A/ ±0.5%FS 3. Secondary Current Test Accuracy : 0.00mA～5A/ 0.01mA/ ±0.5%FS 4. Turn Ratio Measurement Range: 1～500 5. Communication Cable Length: 2M 6. Power Supply : Alkaline batteries (1.5V AAA × 4)

On-line monitoring of loop grounding resistance and metal loop coupling resistance, and grounding condition monitoring. 1. Model No.:ETCR2800KB 2. Measure Range: 0.010Ω~100Ω 3. No need to disconnect the grounding down lead and no need with auxiliary electrodes 4. Rain and dust proof, can be installed and used in outdoor 5. Network system can be built to realize real-time detection and remote monitoring 6. Power Supply : 6VDC~12VDC, 50mA Max.(External power supply, optional GPRS 12VDC 150mA Max)

Applied to on-site high voltage line electricity testing, identify voltage level of high voltage system, inspect fault of high voltage line, repair the inspect induced voltage of the neon lamp, high voltage sodium lamp, inspect residual high voltage or induced voltage, etc. 1. Model : ETCR1820B 2. Voltage Gear : Nine gears 3. Electricity TestRange : 240V～500KV(optinal) 4. Electricity Test Level : 380V、6.6kV、10kV、35kV、66kV、110kV、220kV 5. Voltage to Earth Display Range : 0.1kV～150kV（Voltage to earth） 6. Power Supply : Zn-Mn dry battery 6F22, 9V

Measurement of AC leakage current, current, higher harmonic current, phase, power energy, power factor. 1. Model No. : ETCR015 2. Range : 0.00mA ~ 100A 3. Clamp Size：17mm×18mm 4. Weight ：175g 5. Safety Class : CATⅢ600V 6. Working Temperature : -15°C～50°C

Measurement of primary and secondary current, transformation ratio, phase difference, polarity and phase sequence of current transformers and transformers below 35kV 1. Model No.: ETCR9500C-008 2. Primary Current Test Accuracy : 0.0A～800A/0.1A/±0.5%FS 3. Secondary Current Test Accuracy: 0.00mA~5A/ 0.01mA/ ±0.5%FS 4. Turn Ratio Measurement Range: 1~500 5. Transmission Distance: Primary: 100m; Seconary: 2m cable 6. Power Supply: DC6V alkaline batteries (1.5V AAA × 8)

On-line detecting of AC/DC current. 1. Model No.：ETCR035AD 2. Range: AC/DC 0.0A~1000A 3. Resolution: 0.1A 4. Accuracy Class: 2.0 5. Output Signal: 1mV/1A 6. Power Supply : 9V DC 6F22

Applied to electric power lines below 500KV, high voltage switchgear (metalclad withdraw switchgear, ring main unit, etc.) or substation remote phase detecting, phase test, phase sequence judgment and electricity inspection, etc. 1. Model : ETCR1500B 2. Phase Detection Voltage : AC10V～500kV 3. Satellite Phase Detecting Distance : 500km 4. Normal Phase Detecting Distance : 200m 5. Voice Prompt : "X signal is normal, Y signal is normal, same phase, out phase". 6. Power Supply : Host：3.7V, 2600mAh Rechargeable lithium battery；Detector:3.7V, 600mAh Rechargeable lithium battery