
Overview
Product Function
Applied toremote and shouting distancephase detecting, phase testing, phase sequence judgement and electrictity testing of the high voltage line,metalclad withdraw switchgear and ring main unit and others occasion.
Product Feature
1. Adopt satellite timing technology, can remote phase detecting or short-distance common phase detecting.
2. Equipped with 3 types of phase detectors, which is handy for various phase detecting occasions.
3. Voice prompt function: "X signal is normal, Y signal is normal, Same phase, Out of phase".
4. Adopt 3.5-inch LCD color screen, which can display the phase, frequency, phase sequence, and phase detecting results on the same screen, and the dynamic vector diagram dispaly are clear and intuitive.
5. The meter has electrical test function and can display line voltage below 110KV.
6. Data storage function, can store 200 groups of data.

Specification
The Detector Technical Specifications
High Voltage Line Phase Detecting
|
Function
|
Description
|
Detector Power Supply
|
Detector: 3.7V, 600mAh Rechargeable lithium battery
|
Phase Detecting Mode
|
Contact mode phase detecting:line voltage≤110kV
Non-Contact mode phase detecting:when 10KV< line voltage≤110kV,can phase detecting on the cable insulation skin; when the line voltage > 110kV, must adopt non-contact mode to testing
|
Phase Detecting Voltage
|
AC10V~500kV
|
Satelite Phase Detecting Distance
|
5000m
|
CommonPhase Detecting Distance
|
260 meters
|
Detector Size
|
130mm×65mm×45mm
|
Detector Weight
|
2PCS,total weight400g
|
Insulation Rod Length
|
Max dia.:Φ45mm;Length:contraction state 1000mm;stretched state:4500mm
|
Ring Main Unit Technical Specification
|
Function
|
Description
|
Detector Power Supply
|
Detector: 3.7V, 600mAh Rechargeable lithium battery
|
Phase Detecting Mode
|
Contact mode phase detecting
|
Phase Detecting Voltage
|
AC 1V~600V
|
Satelite Phase Detecting Distance
|
5000m
|
Phase Detecting Distance
|
30 meters
|
Detector Size
|
120mm×54mm×30mm
|
Detector Weight
|
2PCS,total weight260g
|
Metalclad Withdraw Switchgear Technical Specification
|
Function
|
Description
|
Detector Power Supply
|
Detector: 3.7V, 600mAh Rechargeable lithium battery
|
Phase Detecting Mode
|
Non-Contact mode phase detecting
|
Phase Detecting Voltage
|
AC10KV~ 35KV
|
Phase Detecting Distance
|
20 meters
|
Detector Size
|
80mm×46mm×26mm
|
Detector Weight
|
6PCS,total weight420g
|
Others Technical Specifications
Function
|
Description
|
HostPower Supply
|
3.7V, 2600mAh Rechargeable lithium battery
|
LCD Size
|
3.5 inch colorful screen; display area:71mm×53mm
|
Host Size
|
195mm×100mm×45mm
|
Host Weight
|
350g
|
Phase Qualitative
|
Same phase:-20°~20°;Out of phase: 100°~140° and220°~260°
|
Phase Range & Accuracy
|
0°~360°;Accuracy:≤±8°
|
Frequency Range & Accuracy
|
45.0Hz~65.0Hz;Accuracy:≤±2Hz
|
Transmitting Frequency
|
433MHz,315MHz
|
Phase Indication
|
Vectogram anddigital display
|
Power Indication
|
The detector with the green power indicator
|
Electricity Testing Indication
|
“Du-du-du” buzzer sound
|
Voltage Grade Display Range
|
0.4kV~110kV
|
Display Speed
|
2 times/second
|
Data Storage
|
200 groups(Power down or replace the battery will not lose data)
|
Satellite Timing Service Accuracy
|
<20nS
|
Search Satellite Indication
|
When searching satellite, dynamic display“----” symbol
|
No Satellite Signal Continue Working Time
|
After the satellite signal search is successful, can synchronous continue phase detecting 1hours which can meet the requirements of the basement and the electric room indoor phase detecting.
|
Data Storage
|
200 groups(Power down or replace the battery will not lose data)
|
Automatic Shutdown
|
15 minutes after boot up, the meter shuts down automatically without any operation
|
Battery Voltage
|
The host battery shows the power level of 4 cells. When there is only 1 cell or 0 cell, please charge; when the indicating light of the detector flashes quickly, means that the battery voltage is low, please charge.
|
Rated Current
|
Detector:30mA max;Host:150mAmax
|
Instrument Weight
|
About8.380KG (include the insulation rod)
|
Instrument Case Size
|
1050mmX310mmX100mm
|
Insulation Test
|
The insulation rod stretched to both ends:AC 220kV/rms;
Host &detector:AC3700V/rms(between exposed metal and plastic shell)
|
External Interference
|
No extra-strong electromagnetic field; No 433MHz, 315MHz same frequency interference
|
Working Temperature And Humidity
|
-10℃~40℃;below80%rh
|
Store Temperature And Humidity
|
-10℃~60℃;below70%rh
|
Protection Level
|
IP63
|
SuitableSafetyStandard
|
Meets the standard of GB13398-92, GB311.1-311.6-8, 3DL408-91, and the national power industry standard requestment (general technical conditions DL/T 971-2017 for 1kV ~ 35kV portable nuclear phase devices for live working).
|
Meet standard IEC61481-A2;2004;IEC 61243-1 ed.2:2003
|
Insulation Test
|
Host, detector :AC3700V/rms(between the exposure metal and plastic shell)
|
Accessories
|
Host: 1PCS, Line detector :2PCS, Probe: 2PCS, Probe hook: 2PCS, Line detector calibration line: 1PCS, Insulation rod: 2PCS, Ring main unit probe: 2PCS, Alligator clip: 2PCS,Metalclad withdraw switchgear detector: 6PCS;Metalclad withdraw switchgear calibration line: 1PCS;USB Data Cable/ Charge Cable:3PCS, Charger:3PCS,Cloth Bag:1PCS
|