Products
Home / Products /

Earth Resistance Tester

/

Earth Resistance Tester-Round Clamp

/ETCR 2100A+ Clamp Earth Resistance Tester

ETCR 2100A+ Clamp Earth Resistance Tester

Earth resistance measurement, loop resistance measurement.


1. Model No.:ETCR2100A+

2. Resistance Measure Range: 0.010Ω~200Ω

3. Data Storage: 99 sets

4. Alarm Threshold Setting: 1-199Ω

5. Alarm Function: audible and visible alarm

6. Power Supply : 6VCD ( 4 PCS of No.5 LR6 Alkaline dry batteries)



Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
  • Clamp Earth Ground Resistance Tester
    ETCR2100+ Clamp Earth Resistance Tester

    Clamp Earth Resistance Tester applied to earth resistance measurement, loop resistance measurement. no need to disconnect the grounding down leads, no need auxiliary electrode, saving time and more effect. 1. Model No.: ETCR2100+ 2. Measure Range: 0.010Ω~1200Ω 3. Data Storage: 99 sets 4. Alarm Threshold Setting: 1-199Ω 5. Alarm Function: audible and visible alarm 6. Power Supply: 6VDC ( 4 PCS of No.5 Alkaline dry batteries)

  • 2100C+ Series Clamp Earth Resistance Tester
    ETCR 2100C+ Clamp Earth Resistance Tester

    Earth resistance measurement, loop resistance measurement, grounding down leads leakage currentmeasurement, judge groundfault. 1. Model No.: ETCR2100C+ 2. Resistance Measure Range: 0.010Ω~1200Ω 3. Leakage Current Measure Range: 0.00mA~20.0A 4. Alarm Threshold Setting:1-199Ω 5. Alarm Function: audible and visible alarm 6. Power Supply : 6VDC ( 4 PCS of No.5 LR6 Alkaline dry batteries)

  • Exclusive use standard resistor
    ETCR3900 Standard Resistor

    Standard Resistor is exclusive used for calibration of grounding resistance tester, equipotential tester and other instrument. 1. Model No.: ETCR3900 2. Resistance Range : 0.001Ω~100KΩ 3. Connection Wire Method: 4-wire method 4. Temperature Coefficient : ±25ppm 5. Test Line : 4PCS 6. Power : 1/2W

  • 9620 series low voltage CT transformation ratio tester
    ETCR9620B Wireless Low Voltage CT Turn Ratio Tester

    Leakage current, current, transformation ratio, ratio difference, angle difference, phase difference and polarity test of current transformer primary & secondary circuits in 380V/220V power distribution system. 1. Model No.:ETCR9620B 2. Primary Current Test Accuracy: 0.0A~3000A/ 0.1A/ ±1%FS 3. Secondary Current Test Accuracy : 0.00mA~5A/ 0.01mA/ ±0.5%FS 4. Turn Ratio Measurement Range: 1~500 5. Wireless Transmission Distance: 100M 6. Power Supply : Alkaline batteries (1.5V AAA X 4PCS & 6F22 9V X1PCS)

  • 1870C Series Arm Type Low Voltage Approach Electric Alarm
    ETCR1870C Arm Type Low Voltage Approach Electric Alarm

    After the operator wears the alarm, and close to the high voltage charged body for a certain distance, the alarm will send out a sound and light alarm according to the  safety distance of the corresponding voltage level to remind the electrical worker to pay attention to safety and avoid high voltage electric shock accident. This product can also be used for line fault detection and electroscope. 1. Model : ETCR1870C 2. Alarm Voltage Range : 40V~1KV(Low voltage alarm) 3. Working Frequency : 50Hz/60Hz 4. Electricity Testing Mode : Non-contact mode 5. Detection Mode : Automatic trigger 6. Power Supply : CR1632(140mAH)button cell2PCS

  • 030 Series Clamp Leakage Current Sensor
    ETCR030 Clamp Leakage Current Sensor 30A

    Measurement of AC leakage current, phase, power energy, power, power factor, harmonicetc. Apply to oscilloscope, harmonic analyzer, power fault analyzer and other industrial control devices. 1:Range:0.00mA~30A AC 2:Turn Ratio:800:1 3:Resolution : 0.01mA 4:Accuracy Class : 0.5 5:Safety Class:   CATⅢ600V 6:CT Size:25mm x 30mm

  • 9550B series wireless H/L voltage CT trun ratio tester
    ETCR9550B Wireless H/L Voltage CT Turn Ratio Tester

    Measurement of primary and secondary current, transformation ratio, phase difference, polarity and phase sequence of current transformers and transformers below 35kV 1. Model No.: ETCR9550B 2. Primary Current Test Accuracy : High voltge clamp: 0.0A~800A/0.1A/±0.5%FS Flexible coil clamp: 0.0A~3000A/0.1A/±1%FS 3. Secondary Current Test Accuracy: 0.00mA~5A/ 0.01mA/ ±0.5%FS 4. Turn Ratio Measurement Range: 1~500 5. Transmission Distance: Primary: 100m; Seconary: 2m cable 6. Power Supply: DC6V alkaline batteries (1.5V AAA × 8)

  • 4000A Series Intelligent Double Clamp Digital Phase Voltmeter
    ETCR4000A Intelligent Double Clamp Digital Phase Voltmeter

    In the case of the tested circuit is not open-loop, measure two AC voltages, current, phase between voltages, phase between currents, phase, frequency, phase sequence, active power, reactive power, apparent power, and power factor between voltage and current. Discriminate the transformer wiring group, inductive and capacitive circuits, test the secondary circuit and the busbar protection system, read the phase relationship between the CTs of the differential protection groups, check the wiring of the meter for correctness, and repair the line equipment, etc. 1. Model No.: ETCR4000A 2. Simultaneous measurement of two channel AC current, range: 0.0mA~20.0A 3. Simultaneous measurement of two channel AC voltage, range: 0.00V~600V 4. Simultaneous measurement the phase between UU, II, UI, range: 0.0°~360.0° 5. Active power Range:0.0W~12kW 6. Power supply : DC9V Alkaline battery LR61.5V AAX6PCS

Top
Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
  • Home

    Products

    skype

    whatsapp